Products

Our prodction

Technical Specifications

Radobla Doctor Blades are used for Rotogravure & Flexographic printing everywhere you can use the Doctor Blades, as well as for coating applications.
Our DB are available in several varieties and edge configurations based on customer applications and process requirements.
Doctor Blades Steel R1

Doctor Blades Steel R1

High carbon steel micro structured suitable for Rotogravure and Flexoprinting Good wear with solvent ink for short and medium work

  • Thickness: from 0,08 mm to 0,50 mm
  • Height: da 5 mm to 90 mm
Doctor Blades Steel R2

Doctor Blades Steel R2

High carbon steel suitable for Lables Rotogravure and Flexoprinting For short and medium work

  • Thickness: da 0,15 mm to 0,20 mm
  • Height: da 5 mm to 90 mm
Doctor Blades Steel R3

Doctor Blades Steel R3

High quality micro structured Steel high yield for long Printing work. This material give very good performance in Rotogravure Printing with very difficult inks and White color.

  • Thickness: da 0,15 mm to 0,20 mm
  • Height: da 5 mm to 90 mm
Doctor Blades Steel R3 SUN

Doctor Blades Steel R3 SUN

High quality micro structured Steel with a coated long Printing work both in Rotogravure than in Flexoprinting print.
This Blades give very high performance for high quality print works

  • Thickness: da 0,15 mm to 0,20 mm
  • Height: da 5 mm to 90 mm
Stainless Steel Doctor Blades For TISSUE

Stainless Steel Doctor Blades For TISSUE

High Quality Stainless Steel, very suitable with water based ink, in tissue printing.

  • Thickness: da 0,10 mm to 0,30 mm
  • Height: da 5 mm to 90 mm
Steel doctor blades

Steel doctor blades

High Quality Stainless Steel, very suitable with water based ink, UV or with high aggressive solvent thank to its high corrosion resistance

  • Thickness: da 0,10 mm to 0,30 mm
  • Height: da 5 mm to 90 mm
NMB PRINT Doctor Blades

NMB PRINT Doctor Blades

NMB PRINT doctor blades coating offer the excellent printing results. The homogeneus and strongly-adhering coating premits an excellent resistance by solvent, glue, varnish and all type of ink.
This new coating preserves blades from the wear caused and improve his life time up to 5 times.

  • Low friction between blades and cylinder
  • high hardness for a long wear resistance
  • NMB is heavy metal free and biocompatible for food printing process
  • Excellent effect anti-adherence & chemical resistance like glue, varnish and difficult inks
LEOPRINT Doctor Blades

LEOPRINT Doctor Blades

Ceramic coating doctor blades for rotogravure and Flexoprintig suitable for very difficult and critical work.
High printing quality and definition where you need a blades whit a very long running life, ideal with abrasive ink, cold glue, ink with high viscosity or special ink.

  • Thickness: da 0,10 mm to 0,30 mm
  • Height: da 5 mm to 90 mm
Plastic Racle/Doctor Blades

Plastic Racle/Doctor Blades

Used in flexoprinting this blades are suitable in narrow and wide web printing as single blade or containment blade for his self-lubricating material. This blades permit a long life of anilox and end-seal.

  • Available Materials: Polyester
  • Thickness: da 0,20 mm to 1,1m
  • Height: da 5 mm to 100 mm
UHMW Plastic Doctor Blades

UHMW Plastic Doctor Blades

UHMW is a self-lubricating material which exhibits excellent wear and abrasion properties.
Suitable for all printing with lacquer, glue and very high acidity solvent.

  • Materiali disponibili: UHMW
  • Thickness: 0,80 mm to 2,5 mm
  • Height: from 5 mm to 2,5 mm
Special Doctor Blades on customer's request/ draw

Special Doctor Blades on customer's request/ draw

Special Doctor Blades produced on customer's request/ draw or for special application

End Seals for Chamber Doctor Blades

End Seals for Chamber Doctor Blades

High precision End Seals made by laser cutting with different materials, thickness and forms produced on technical drawing or samples to improve the print and allowed a lowest ink wear

R.C.M. Cutter

R.C.M. Cutter

The Radobla Cutter Machine is characterised by an easily defínítíon of length thank to adiustable end stops, has a comfortable box settíng for different sÍze of box. Upon request you can also use it for the spools.
Our Cutter Machine ís buílt with light steel to guarantee strength and lightness and manageabilíty (weíght 2,5 kg) and has the option to add more piece at customer request.

  • Lenght Cut: up to 1010 mm
  • Total machine lenght: 1550 mm
  • Weight: 2,5 kg
  • SThickness of the blades: up to 0.50/0,60 mm
  • Width of the blades: up to 100 mm
Contact us for more information